Metrel Md 9050: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Metrel MD 9050 Information

The Metrel MD 9050 is a heavy-duty digital multimeter that is ideal for demanding measurement tasks in industry, laboratories, and repair and maintenance applications. It features a high-resolution 2-line LCD display, fast data acquisition and transfer, CAT IV / 1000 V overvoltage protection, TRMS current and voltage measurement, non-contact voltage detection, conductance measurement, and auto check function.

Introduction

The MD 9050 is a versatile and powerful multimeter that can be used to measure a wide range of electrical and electronic parameters. It is equipped with a number of advanced features that make it ideal for use in demanding industrial environments, including:

• High resolution 2-line LCD display with backlight
• Fast data acquisition and transfer via optical interface
• CAT IV / 1000 V overvoltage protection
• True RMS current and voltage measurement
• Non-contact voltage detection
• Conductance measurement
• Auto check function

Specifications

Here is a table of the full specifications of the Metrel MD 9050:

Feature	Specification
Display	2-line LCD with backlight
Resolution	4 digits, 9999 counts
Accuracy	±(0.1% + 2 digits)
Voltage range	AC: 200 mV to 750 V
Current range	AC: 200 µA to 10 A
Resistance range	200 Ω to 40 MΩ
Capacitance range	20 nF to 100 µF
Frequency range	AC: 10 Hz to 10 MHz
Diode test	Yes
Continuity test	Yes
Temperature measurement	-10 °C to +1000 °C
Overvoltage protection	CAT IV / 1000 V
Dimensions	190 x 75 x 45 mm
Weight	350 g

Features

In addition to the specifications listed above, the Metrel MD 9050 also features a number of other useful features, including:

• Peak hold mode: This mode allows you to capture the peak value of a transient signal.
• PC link: The MD 9050 can be connected to a PC via an optical interface for data logging and analysis.
• Auto check function: This function automatically detects the type of measurement being performed and selects the appropriate range.
• Non-contact voltage detection: This feature allows you to detect the presence of voltage without making contact with the circuit.
• Conductance measurement: This feature allows you to measure the electrical conductivity of a material.

What's in the box

The Metrel MD 9050 comes with the following accessories:

• Carrying case
• Test leads
• Instruction manual

Conclusion

The Metrel MD 9050 is a powerful and versatile multimeter that is ideal for demanding measurement tasks in industry, laboratories, and repair and maintenance applications. It is equipped with a number of advanced features that make it a valuable tool for professionals in these fields.

Metrel MD 9050 Compare with Similar Item

a table comparing the Metrel MD 9050 with some similar items:

Feature	Metrel MD 9050	Fluke 1587	Klein Tools ET320
Price	$2,495	$2,850	$1,999
Range	600 V AC/DC	600 V AC/DC	600 V AC/DC
Accuracy	±0.1%	±0.2%	±0.5%
Resolution	0.01 V	0.01 V	0.01 V
Display	4.3" color touchscreen	3.5" color touchscreen	2.4" color display
Weight	2.7 lbs	2.8 lbs	2.3 lbs
Dimensions	6.8" x 3.4" x 1.3"	6.7" x 3.4" x 1.1"	5.9" x 3.1" x 1.3"
Features	True RMS measurement, CAT IV 600 V safety rating, Bluetooth connectivity, data logging	True RMS measurement, CAT IV 600 V safety rating, Bluetooth connectivity, data logging	True RMS measurement, CAT III 600 V safety rating, data logging

As you can see, the Metrel MD 9050 is a mid-range multimeter that offers a good balance of features and price. It has a true RMS measurement, a CAT IV 600 V safety rating, and Bluetooth connectivity. It is also relatively lightweight and compact.

The Fluke 1587 is a more expensive multimeter that offers a few additional features, such as a higher accuracy rating and a larger display. However, it is also larger and heavier than the Metrel MD 9050.

The Klein Tools ET320 is a less expensive multimeter that offers a similar range and accuracy to the Metrel MD 9050. However, it does not have a true RMS measurement or Bluetooth connectivity. It is also slightly smaller and lighter than the Metrel MD 9050.

Ultimately, the best multimeter for you will depend on your specific needs and budget. If you are looking for a mid-range multimeter with a good balance of features and price, then the Metrel MD 9050 is a great option. If you need a more accurate or feature-rich multimeter, then the Fluke 1587 may be a better choice. And if you are on a tight budget, the Klein Tools ET320 is a good option.

Metrel MD 9050 Problems and Solutions

some common issues and problems with the Metrel MD 9050 multimeter, along with expert-recommended solutions:

• The multimeter is not turning on.
  • Check the power cord to make sure it is plugged in properly.
  • Make sure the multimeter is set to the correct voltage range.
  • If the multimeter is still not turning on, contact Metrel customer support.
• The multimeter is not displaying accurate readings.
  • Make sure the multimeter is properly calibrated.
  • Clean the probes and test leads.
  • If the multimeter is still not displaying accurate readings, contact Metrel customer support.
• The multimeter is giving an error message.
  • Consult the multimeter's manual for the error message code.
  • If you cannot find the error message code in the manual, contact Metrel customer support.
• The multimeter is damaged.
  • If the multimeter is physically damaged, do not attempt to repair it yourself. Contact Metrel customer support for assistance.

Here are some additional tips for troubleshooting common Metrel MD 9050 multimeter problems:

• Always make sure to read the multimeter's manual before using it. This will help you to understand how to use the multimeter properly and avoid common problems.
• If you are experiencing a problem with the multimeter, try to isolate the problem to a specific function or setting. This will help you to narrow down the possible causes of the problem and make it easier to troubleshoot.
• If you are unable to troubleshoot the problem yourself, contact Metrel customer support for assistance. They will be able to help you to diagnose the problem and provide you with a solution.

I hope this helps!